|
|
Support system for administration and control of FSO transceiver
Janík, Lukáš ; Němeček, Jiří (referee) ; Wilfert, Otakar (advisor)
Tato práce se zabývá problematikou optických bezkabelových spojů (FSO). V úvodní kapitole jsou diskutovány přednosti, základní principy a dílčí komponenty FSO spojů. Druhá kapitola se zabývá atmosférou z pohledu šířícího se optického svazku, jejím složením, základními veličinami a jevy v ní nastávajícími. V následující kapitole je popsáno několik metod ke zmírnění jevů majících negativní vliv na kvalitu spoje. Druhá část práce se zabývá návrhem podpůrného systému pro FSO, založeném na softcore mikroprocesoru MicroBlaze, návrhem jednoduchého síťového přepínače a síťového rozhraní. Závěr práce pojednává o implementaci webového serveru a tvorbě webové prezentace umožňující vzdálenou správu FSO a jeho komponent.
|
|
|
HW interface of database server
Janů, Petr ; Zamazal, Michal (referee) ; Fuchs, Michal (advisor)
The aim of master's thesis is implementation of hardware interface database server. Interface will be collecting data at installation place. Interface will be connected to a remote MySQL server using an Ethernet network and saving data received by serial line in a database.
|
|
|
Packet Analyser for UWB based on 15.4a standard
Leixner, Martin ; Šimek, Milan (referee) ; Mráz, Ľubomír (advisor)
The aim of this work is study the standard for wireless sensor networks IEEE 802.15.4a. Design and implementation of a packet analyzer for ultra wideband technology com- pliant with IEEE 802.15.4a standard. Integrate packet analyzer to inspection software Wireshark and implement dissector for view packets. Finally, analyze and evaluate the parameters of the proposed packet analyzer.
|
|
|
Increase of robustness of communication architecture for remote spectroscopy
Cebo, Patrik ; Klus, Jakub (referee) ; Kaiser, Jozef (advisor)
This thesis deals with the design of new communication architecture of a device for remote laser spectroscopy. The conceptual model is based on the analysis of the state of the art systems for remote laser spectroscopy. Moreover, the advantages and disadvantages of custom electric buses and its failures in deployment are discussed within this thesis. The result of the work includes the design of new communication architecture supported by Ethernet standards. The next part of the thesis focuses on the customized stepper motor controller composition, which will resolve the theoretical findings arising from the analysis.
|
|
|
Modular RGB LED display with Ethernet
Zemánek, Petr ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with an electronic circuit and a PCB of a modular RGB LED display with the Ehernet interface. Firstly, author describes a RGB colour model, features of RGB LED displays, ways of control them. The next chapter contains a short description of the Ethernet interface, UDP and TCP protocols and a lwIP TCP/IP stack. The last theoretical chapter is an introduction to ARM Cortex-M3 and Cortex-M4 based microcontrollers. The next chaper is deals with a hardware design of the modular RGB LED display. The device is designed to be modular. Individual devices can be combosed together and create a larger display. Data from the Ethernet interface will be displayed on the RGB LED matrix, resolution of the matrix is 32 × 32 (1024 diodes). A refresh frequency is 100 Hz, a color depth is High color (16 bits) and a scanning 1/16 (two rows is driven at the same time). The next chapter describes the firmware for the RGB LED display, all its logical parts including a web page. Author also created the PC application, which sends pictures using UDP protocol to individual modules.
|
|
|
High speed acquisition system
Svoboda, Tomáš ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
This master's thesis is focused on the design of a highspeed aquizition system which is based on FPGA and a highspeed AD converter with modern JESD204B interface. Considering the requirements, such as high samplig rate, the current range of available devices is limited. Therefore the market overview of the modern IC and modules was made. The resulting design is based on available modules, so the rached sampling rate is up to 5 GSa/s with 12bits resolution. Data from measurement are send to PC via Ethernet which uses lwIp stack and TEMAC core on Microblaze proccessor.
|
|
| |
|
|
Implement Rubber Duckies on Available USB Devices and Make a Practical Test
Do, Hung ; Holop, Patrik (referee) ; Tamaškovič, Marek (advisor)
Tato práce se zabývá problematikou počítačových útoků typu BadUSB, implementací jednoho ze zařízení (Rubber Ducky) a následnou obranou proti těmto typům útoků. Mým úkolem je rozbor funkcionality univerzální sériové sběrnice, komunikace mezi hostem a zařízením a slabiny proti BadUSB útokům. Za tímto účelem jsem implementoval composite (složené) USB zařízení při použití mikrokontroleru Raspberry Pi Pico a externí open source knihovny TinyUSB. S funkčním prototypem prezentuji čtenáři několik možných ochranných mechanismů před těmito druhy útoků na operačních systémech Microsoft Windows a GNU/Linux. Tato práce varuje lidi před nevýhodami USB funkce plug-and-play a nebezpečím při připojování neznámých USB zařízení do našich počítačů.
|
|
|
Increase of robustness of communication architecture for remote spectroscopy
Cebo, Patrik ; Klus, Jakub (referee) ; Kaiser, Jozef (advisor)
This thesis deals with the design of new communication architecture of a device for remote laser spectroscopy. The conceptual model is based on the analysis of the state of the art systems for remote laser spectroscopy. Moreover, the advantages and disadvantages of custom electric buses and its failures in deployment are discussed within this thesis. The result of the work includes the design of new communication architecture supported by Ethernet standards. The next part of the thesis focuses on the customized stepper motor controller composition, which will resolve the theoretical findings arising from the analysis.
|
|
|
High speed acquisition system
Svoboda, Tomáš ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
This master's thesis is focused on the design of a highspeed aquizition system which is based on FPGA and a highspeed AD converter with modern JESD204B interface. Considering the requirements, such as high samplig rate, the current range of available devices is limited. Therefore the market overview of the modern IC and modules was made. The resulting design is based on available modules, so the rached sampling rate is up to 5 GSa/s with 12bits resolution. Data from measurement are send to PC via Ethernet which uses lwIp stack and TEMAC core on Microblaze proccessor.
|
guest ::
